Hot dip galvanized pipes are formed by reacting molten metal with an iron substrate to form an alloy layer, thereby combining the substrate and coating. Hot dip galvanizing is the process of first pickling steel pipes to remove iron oxide from their surface. After pickling, the steel pipes are cleaned using ammonium chloride or zinc chloride aqueous solution or a mixture of ammonium chloride and zinc chloride aqueous solution before being sent to the hot-dip galvanizing tank. Hot dip galvanizing has advantages such as uniform coating, strong adhesion, and long service life. The steel pipe substrate undergoes complex physical and chemical reactions with the molten plating solution, forming a corrosion-resistant and tightly structured zinc iron alloy layer. The alloy layer is integrated with the pure zinc layer and the steel pipe substrate. Therefore, it has strong corrosion resistance.
1. Uniformity of galvanized layer: The steel pipe specimen shall not turn red (copper plated) after being continuously immersed in copper sulfate solution for 5 times.
2. Surface quality: The surface of galvanized steel pipes should have a complete galvanized layer, and there should be no black spots or bubbles that have not been coated. It is allowed to have small rough surfaces and local zinc nodules.
3. Galvanized layer weight: According to the requirements of the purchaser, galvanized steel pipes can be measured for zinc layer weight, and the average value should not be less than 500g/square meter. Any sample should not be less than 480g/square meter.
